Huggers For Existing Vertical Rib Standing Seam Roofs


Product Description: Factory-notched Hugger sub-purlins accommodate vertical rib standing seam panels with various rib spacing and height as well as with or without stand-off clips and thermal blocks. Hugger has standard height of 2-1/2”, but can be manufactured with taller web to accommodate various depths of insulation.
Rib Spacings:
12” to 20”


Market Names:
Span-Lok
Snap Seam
Lok-Seam

DOWNLOADS
  Performance Specifications
Construction Details
Design Manual
Installation Instructions
Testing and Product Approvals
Project Info Form

Our vertical standing seam Huggers are manufactured to fit this very popular panel type used on many metal buildings built from the late 1960’s to current day. The vertical rib SSR Hugger is manufactured to fit any vertical rib standing seam regardless of the rib spacing and will accommodate the old Armco buildings as well as a host of other current and long past manufacturers. The standard height of 2-1/2” mentioned above, accommodates up to 2” tall ribs, but can be increased to suit your specific application.

The product can also satisfy roofs with stand-off panel clips that hold the existing roof 1” above the existing purlins or when compressible material is installed under the existing roof. In this condition a special anti-rotation arm is included that attaches the Hugger to the side of the existing rib, to minimize any potential roll. This product requires special anchorage fasteners that are designed to secure the Huggers with the 1” offset above the existing purlin plus a fastener to secure the arm.

 

Copyright 2017, Roof Hugger, LLC, All Rights Reserved.
A Member of LSI Group, Inc.
Physical Address: 142-B Whitaker Rd. Lutz, FL 33549
Mailing Address: P.O. Box 1027 Odessa, FL 33556
Toll Free: 800-771-1711     Direct: 813-909-4424
Email: sales@roofhugger.com

Web Design by Bug-Eyes Web